When you’re putting an emergency kit together for your car, it’s a practical idea to include a set of jumper cables. They don’t require much space and could help another or you off the side of the road. They are straightforward to use with a little instruction and practice. The first thing to consider is that each end contains a red clamp for a positive charge and a black clamp for a negative. The second thing is that you don’t want the clamps to touch another metal surface once you’ve started to connect to a battery.
Begin with the dead battery first. Connect the positive cable to the battery terminal with a plus sign and the black cable to the terminal with the minus sign. Repeat the process on the good battery. After you’ve connected them, let them charge for a couple of minutes. Rev the engine and try to start the dead car. It should fire up within a couple of tires. If you’re not getting anywhere after several attempts, it could indicate there’s another electrical issue. It’s best to stop and have your vehicle serviced.
Don’t hesitate to stop in to our service center Riverhead Ford Lincoln in Riverhead, NY. We’re happy to answer any questions and assist you with any of your vehicle’s maintenance needs.
Categorías:
Social